Tap-hole clay for smelting electric arc furnace

Tap-hole clay for smelting electric arc furnace


Classification:

Tap-hole mix for smelting electric arc furnace is mainly used in the taphole of large-scale smelting electric arc furnace. Tap-hole mix for smelting electric arc furnace by our company has good combination, it can maintain the muzzle without deformation under normal conditions of use, and has the characteristic of easy to open.
Send Mail

Product Details


Tap-hole clay for smelting electric arc furnace is mainly used in the taphole of large-scale smelting electric arc furnace. Tap-hole clay for smelting electric arc furnace by our company has good combination, it can maintain the muzzle without deformation under normal conditions of use, and has the characteristic of easy to open.

 

The key technology of the project products:

The high-tech products with material composition, particle grading distribution and comprehensive properties were developed by selecting varieties of suitable raw materials for scientific matching through a large number of experiments.

Through a large number of tests, several kinds of single or composite type non-polluting binders were selected to avoid generating flue gas with hazardous materials in the use of tap-hole mix and improve the working environment.

The tap-hole mix for smelting electric arc furnace developed has the advantages of less pollution, easy blocking, and erosion resistance.

 

Advantages of tap-hole clay for smelting electric arc furnace:

1. The tensile strength is high, and it is of great significance to maintain the stability of the blast furnace condition (tapping depth, tapping time fluctuation, total air blocking rate, etc.), so that the blast furnace has the basis for increasing production.

2. Strong slag resistance. The tap-hole clay consumption is low, generally one-fifth of the hydrous tap-hole mix.

3. It has certain expansion performance.

4. With suitable porosity and strength, it can adapt to the use of large blast furnaces over 2000m.

 

Item Bulk density(g/cm3)≥ Apparent porosity(%)≤ Cold crushing strength(MPa)≥ Linear change rate(%) Al2O3 SiO2 Si3N4+SiC+C≥ Water content ≤
JD-11350℃×2h 1.78 32 7 0.5 19 40 40 1
JD-21400℃×3h 2 29 10 0.5 35-45 30 26 1

 

Tap-hole clay for smelting electric arc furnace

 

Key words:

smelting electric arc furnace

tap hole clay