Gunning mass spray coating for electric furnace

Gunning mass spray coating for electric furnace


Classification:

The electric furnace gunning material is made of high quality burnt magnesia and other alkaline composite materials with reasonable particle size distribution.
Send Mail

Product Details


The electric furnace gunning material is made of high quality burnt magnesia and other alkaline composite materials with reasonable particle size distribution.

 

The product has good sintering and corrosion resistance, and has low rebound rate and high adhesion rate during construction, which is convenient for spraying work.

 

It is suitable for hot charging of hot zone, slag line, furnace slope, side wall and tapping hole of electric furnace, ultra high power electric furnace, so that the lining can reach uniform erosion, increase furnace service life, reduce cost and improve production efficiency. It is an ideal matching material.

 

Brand DLP-1 DLP-2
Chemical content (%)  MgO ≥82 75-80
CaO ≤2 5-10
Bulk density (g/cm3) ≥ 110℃ 2.2 2
1500℃ 2.4 2.1
Compressive strength(MPa)≥ 110℃ 20 20
1500℃ 40 40
Remark The specification is just for reference only. The real products will be tailored to special operation conditions and customer’s special requirements.

 

Gunning mix for electric furnace

 

Key words:

electric furnace

gunning material